The hotel need to pay attention to during the process of washing equipment installation which matter

        The hotel procurement and purchasing to buy back the automatic washing equipment, all want to involve the issue of installation, today, the power net washing equipment experts would focus on washing equipment for everyone how to install, and matters needing attention of washing equipment installed.As washing equipment manufacturers, we sincerely remind users: make washing equipment is completely installed, strive for one-time pass, reduce unnecessary trouble in the future.
     (1), washing equipment is in place before the examination
 Washing equipment before installing, be sure to check whether have damaged during the transit, make sure all the connecting bolts, pipe and pipe joint (inlet pipe, pressure pipe, drainage pipe), all electrical connector, a plug-in is loose, check the washing equipment of dampers, damping spring whether have damage, if found, please immediately processing, to prevent accidents.
     (2), washing equipment installation, must pay attention to the clearance space around size
 Washing equipment and must leave enough space between the walls, to facilitate the daily maintenance and maintenance.Washing equipment back away from the wall not less than 1.5 meters, not less than 1 m on both sides, and must be installed on the solid foundation, foundation construction must contact us before the manufacturer to identify a specific size, installation must ensure that the damper and spring shift happens.
     (3), washing equipment level adjusting
 In order to reduce the drying of vibration and noise at high speed, please put the washing equipment firmly fixed on the ground, no washing equipment once checked levels, can lead to washing equipment of high-speed dehydration occurs when violent shaking and accidents, so the washing equipment must be four anchor bolt is level, then tighten the anchor bolts, make washing equipment firmly fixed on the ground.
     (4), steam source to enter
          Steam washing equipment imported into the upper portion of the washing machine, normal work when steam pressure between PA PA 0.6 0.4, if the steam pressure is higher than 0.85 PA, may damage the steam pipeline, personal casualties, between the steam source and washing machine to install a manual stop valve, filter and pressure reducing valve in order to adjust to the steam pressure washing equipment, all piping should be insulated, untouchable steam pipes, because the surface of the pipe is very hot, can cause severe burns, if you want to come into contact with the line maintenance, please close the steam for its cooling after operation.