Add Favorite
WeChat
Hi,Welcome To ENEJEAN Hotoline:8620-36548602 Sitemapsitemap Chinese
Select Language
Thai
Indonesian
Korean
Japanese
Vietnamese
Malay
Russian
Filipino
French
German
Portuguese
Hindi
Xhosa
Arabic
Burmese
Cambodia
Lao
China
Italian
Spanish
Dutch
Greek
Turkish
Bengali
Persian
Poland
Current position:Home-> Industrial washing machine News

Large washing equipment leaking failures, how to repair

    Hotel laundry washing equipment in the phenomenon of leaking air leakage often occurs, as laundry staff we should to the washing equipment breakdown maintenance maintenance should understand some of the following force net washing machinery manufacturing co., LTD. The technology of small make up will share with you some washing equipment fault maintenance methods of leakage;
    Industrial washing equipment into the water valve around the screw holes on both sides of the leakage, the check is under the water inlet of plastic net is broken, and lead to water flow everywhere, part of the screw holes, on the edge of the waters from the inlet valve leakage.The fixed screw off the console, then console turning in the direction of machine cover, main can not overexert, lest damage the wiring and water level control switch of the pneumatic tube.Then can see is located at the central solenoid valve, the water in a plastic electromagnetic valve bottom net, remove the water solenoid valve at this point, take out the plastic net from the water solenoid valve, both inside and outside the plastic net stick good will burst, and then use rubber band to tie up tight, you can install reduction, water test, no leakage.
Caused by the plastic net break up reason is various, high water pressure and the intensity of the plastic net is not enough, the water pressure low and high adaptability is poor.So before not leaking, but on the plastic net tangle on rubber band, to prevent the water pressure changes do not leak, ensure the washing equipment normal use.
    Large washing equipment mechanical failure occurred while washing the sound is not itself, is just washing equipment placed ground level or at the foot of the four machine caused by high range.Wash wash equipment place is not smooth, it extremely easy to cause the fuselage vibration during operation or swing caused the crash.Encounter this kind of situation, as long as the mobile washing equipment placement or adjust the height of the four legs, make the washing equipment was calm, perpendicular to the ground.